VTech Telecommunications Ltd 80-9098-00 Manuel D’Utilisation

Page de 332
Troubleshooting
114
  
  
Syn248 SB35020/SB35025 Deskset User’s Guide
Back to Contents
The TL7600 Headset does not work at all.
The TL7600 Headset registration is not working.
Poor audio quality. Speech is cutting out.
Probable Cause
Corrective Action
The Headset is not getting 
power from its battery.
„
Verify that the battery is installed and charged 
correctly.
„
Place the Headset into the accessory charger. 
Ensure the charger is securely plugged into an 
outlet not controlled by a wall switch. The 
Headset LED will light to indicate that the 
Headset is charging.
„
If the battery is completely depleted, it can take 
up to 10 minutes to charge the battery enough 
for the Headset to work even briefly. In this case, 
the ON/OFF LED will remain off and you will not 
be able to use the device. After 10 minutes of 
charging, remove the Headset from the charger 
and press ON/OFF on the Headset or HEADSET 
on the Deskset to turn on the Headset.
„
Replace the Headset battery.
Probable Cause
Corrective Action
The Headset and the Deskset 
are not communicating with 
each other.
„
Confirm that you have placed the Headset in the 
charger before you press 
 on the 
Deskset.
„
If registration does not start, try lifting the 
Headset out of the charger for a few seconds 
before placing it back.
Register
Probable Cause
Corrective Action
The Headset is almost out of 
range or is experiencing 
interference.
„
You may be close to being out of range. Try 
moving closer to the Deskset.
„
Other electronic products can cause interference 
with your Headset. Try installing the Deskset far 
away from devices such as televisions, 
microwaves, or other cordless devices.
„
If the problem persists, check audio quality on the 
Deskset and/or contact your system 
administrator.