DEI Headquarters Inc. DEI2510 Manuel D’Utilisation
User guide
P.17
Turn the ignition key to the IGNITION ON (RUN) position.
Press and hold the
button until the parking lights come ON for
2 seconds, pause, and then flash once.
If Safe Start is enabled, you can activate Cold Weather Mode by:
Pressing and releasing the
button, then, pressing and holding
the
button until the parking lights flash 3 times.
To verify whether the system is in Cold Weather Mode (automatic transmissions
only):
only):
Press the brake pedal:
If the vehicle is in cold weather mode, the parking lights will remain ON
while the brake pedal is pressed.
while the brake pedal is pressed.
Extended Run Time
With the vehicle running under a remote start, pressing and holding the
button for more than 3 seconds will reset the run time counter to zero
and restart the run time cycle from the beginning.
The horn (if programmed) will honk once;
The parking lights will flash slowly 3 times then remain lit.
To stop the vehicle at any moment, simply press the
button. This
procedure can only be carried out once per remote start.
Example: If your Module is programmed for a runtime of 3 minutes and your
vehicle has been running for 2 minutes already, pressing the
button
will reset the counter to zero and the Engine will run for another cycle (in this
case, 3 minutes).
Disable/Enable LED flashing
To disable the LED: Press
and
simultaneously
until the parking lights flash three times.
To Enable the LED: Press and
simultaneously until the
parking lights flash once.