DEI Headquarters Inc. DEI546 Manuel D’Utilisation
16
©
2002
Directed Electronics, Inc.
Remote Start Harness Wire Descriptions
H3/1 BLUE Status Output
This wire supplies a 200mA output as soon as the module begins the remote start process and is
normally used to activate an immobilizer bypass module. The H3/1 BLUE wire can also be
programmed to rearm a factory anti-theft system when the remote start shuts down. (See the Feature
Descriptions section in this guide.)
This wire supplies a 200mA output as soon as the module begins the remote start process and is
normally used to activate an immobilizer bypass module. The H3/1 BLUE wire can also be
programmed to rearm a factory anti-theft system when the remote start shuts down. (See the Feature
Descriptions section in this guide.)
NOTE: This wire can also be used to bypass optional sensors and door triggers as described in the
following diagram.
following diagram.
To bypass an optional sensor:
H3/2 BLUE/BLACK (-) Optional Third Ignition Output
This output provides 200mA as soon as the remote starter is activated. It can be used to power a
relay to energize a positive (+) third ignition as shown below. This output is capable of driving two
relays if necessary.
This output provides 200mA as soon as the remote starter is activated. It can be used to power a
relay to energize a positive (+) third ignition as shown below. This output is capable of driving two
relays if necessary.