DEI Headquarters Inc. DEI546 Manuel D’Utilisation

Page de 44
©
2002 
Directed Electronics, Inc.
7
Primary Harness (H1) Wire Connection Guide
Primary Harness (H1) Wiring Diagram
___
___
___
___
___
___
___
___
___
___
___
___
Primary Harness Wire Descriptions
H1/1 ORANGE (-) Ground-When-Armed Output
This wire supplies a (-) 500 mA ground as long as the system is armed. This output ceases as soon
as the system is disarmed. The orange wire is pre-wired to control the 8618 starter kill relay.
NOTE: If using the H1/1 ORANGE wire to activate an add-on accessory such as window
automation, pager or voice module a 1 Amp diode must be installed to ensure proper operation.
Insert the diode as shown in the following diagram.
IMPORTANT! Never interrupt any wire other than the starter wire.
RED/WHITE
(-) 200 mA Channel 2 Output
RED
(+) Constant Power Input
BROWN
(+) Siren Output 
OPEN
No Wire
BLACK 
(-) Chassis Ground Input 
VIOLET 
(+) Door Trigger Input, Zone 3
BLUE
Multiplexed Trigger Input, Zone 1
GREEN
(-) Door Trigger Input, Zone 3
BLACK/WHITE
(-) 200 mA Domelight Supervision Output 
WHITE/BLUE
(-) Remote Start Activation Input
WHITE
(+)/(-) Selectable Light Flash Output
ORANGE
(-) 500 mA Armed Output 
H1/1
H1/2
H1/3
H1/4
H1/5
H1/6
H1/7
H1/8
H1/9
H1/10
H1/11
H1/12