DEI Headquarters Inc. HYU1800 Manuel D’Utilisation
Page-16
IMMOBILIZER INTERFACE MODULE
Transponder T-harness
FIG 4
Unplug the immobilizer/key switch connector located on the side of the
ignition switch cylinder (Picture V) and interconnect the INTERFACE
ignition switch cylinder (Picture V) and interconnect the INTERFACE
MODULE supplied T-harness (Fig 4). Run the T-harness on top of the
steering column and secure it with a tie wrap.
steering column and secure it with a tie wrap.
Picture V
WARNING! DO NOT ATTEMPT TO START THE VEHICLE WITH THE TRANSPONDER T-HARNESS
DISCONNECTED FROM THE BYPASS INTERFACE MODULE.
DISCONNECTED FROM THE BYPASS INTERFACE MODULE.