SR Telecom Inc STRIDE2400-SBS Manuel D’Utilisation
Addendum A
This addendum is an attachment to be included within the manual of SR Telecom’s Stride2400 Product
Equipment Operation:
Attention: Changes or modifications not expressly approved by SR Telecom or their designated compliance
representative(s) could void the user’s authority to operate this equipment.
Equipment Compliance:
Note: This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Equipment Operation:
Attention: Changes or modifications not expressly approved by SR Telecom or their designated compliance
representative(s) could void the user’s authority to operate this equipment.
Equipment Compliance:
Note: This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Increase the distance between the equipment being interfered with and this product
• Connect the equipment being interfered with into an outlet on a different circuit then the one
which this product is connected.
• Consult the installation and/or manufacture for assistance.
Antenna Installation Distance:
This is a line of sight system; requiring the antenna to be installed at a minimum height of 25 feet. This
installation height ensures proper operation of the system, while ensuring proper separation to the antenna.
Due to the minimum height of 25 feet, the separation distance from the antenna to the user is greater than
30cm.