Buffalo 04604022-0 Manuel D’Utilisation
1
2
3
4
5
6
- 4 -
Chapter 1 Product Overview
Hardware Overview
Front Panel LEDs
1
Power LED
On:
On:
Power is on.
Off:
Power is off.
This LED is off when the “LED setting” is set to Off.
This LED is off when the “LED setting” is set to Off.
2
Diag LED (Red)
This indicates the status of this unit depending on the number of blinks
per cycle.
per cycle.
Note: When the unit is first turned on or restarted, the Diag LED will blink for almost a
minute during boot. This is normal.
Off:
Nomal.
Solid red at startup
(about 2 to 3
minutes):
(about 2 to 3
minutes):
RAM error.
Blinks red twice
at startup or
immediately after
settings are saved:
at startup or
immediately after
settings are saved:
Flash ROM error.