TransCore 05684 Manuel D’Utilisation
www.transcore.com
© 2008 TC IP, Ltd. All rights reserved. TRANSCORE is a registered trademark and eZGo Anywhere is a trademarke of TC IP, Ltd., and are used under license. All
other trademarks listed are the property of their respective owners. Contents subject to change. Printed in the U.S.A.
other trademarks listed are the property of their respective owners. Contents subject to change. Printed in the U.S.A.
Products covered by this document are protected
by one or more of the following U.S. patents 4,739,328; 5,030,807; 5,113,156; 5,606,322; 6,061,614; 6,107,917; and foreign equivalent patents. Other
patents pending.
S P E C I F I C A T I O N S
412101 07/08
eZGo Anywhere Standard OBU Placement Guide
Choose this option if your mirror post is
attached low on the windshield.
Use this placement guide to locate the approximate
position of the standard OBU. If the upper portion of your
windshield is tinted with aftermarket-conductive tint, use
the next option. Follow the installation instructions to
mount the OBU.
attached low on the windshield.
Use this placement guide to locate the approximate
position of the standard OBU. If the upper portion of your
windshield is tinted with aftermarket-conductive tint, use
the next option. Follow the installation instructions to
mount the OBU.
Choose this option if your mirror post is
attached high on the windshield.
Use this placement guide to locate the approximate
position of the standard OBU. If the upper portion of your
windshield is tinted with aftermarket-conductive tint,
place the OBU at least 2 inches (5.1 cm) below the tinted
area. Follow the installation instructions to mount the
OBU.
attached high on the windshield.
Use this placement guide to locate the approximate
position of the standard OBU. If the upper portion of your
windshield is tinted with aftermarket-conductive tint,
place the OBU at least 2 inches (5.1 cm) below the tinted
area. Follow the installation instructions to mount the
OBU.
Choose this option if your mirror post is attached
to the headliner.
Use this placement guide to locate the approximate
position of the standard OBU. If the upper portion of your
windshield is tinted with aftermarket-conductive tint,
place the OBU at least 2 inches (5.1 cm) below the tinted
area. Follow the installation instructions to mount the
OBU.
to the headliner.
Use this placement guide to locate the approximate
position of the standard OBU. If the upper portion of your
windshield is tinted with aftermarket-conductive tint,
place the OBU at least 2 inches (5.1 cm) below the tinted
area. Follow the installation instructions to mount the
OBU.