TransCore 05716 Manuel D’Utilisation

Installing the Multiprotocol Rail Reader

4-7

Figure 4-3 Location of Communications/Power Port on MPRR

Figure 4-4 Pin Assignments for Signal to Host Connectors

Mounting the MPRR

This section lists procedures and materials required for mounting the MPRR on a wall
or other flat surface based on the site’s requirements.

In permanent installations the MPRR should be positioned as close as possible to the
antenna. Long cable runs increase system sensitivity to noise. See

Table 2-4 on page

2-12

for maximum RF cable lengths.