TransCore X5 Manuel D’Utilisation

Mercury5 RFID Reader Installation and Service Guide

Installation Requirements

ThingMagic

7

You can place the reader on a shelf or mount it to a wall.

To mount the reader on a wall use the following instructions:

1.    Hold the reader in its mounting location and mark the position of the two mounting 

screws. The minumum screw size is #12 (M5).

2.    Drill holes for the screws and install wall anchors if necessary. 

3.    Insert the screws and tighten until almost flush with the wall.

4.    Slip the reader over the screws and slide down to lock the screws in the keyhole openings.

5.    Tighten the screws.

 

Mounting Holes