Twinhead International Corporation E14A Manuel D’Utilisation

Power Management — Heat Considerations 

Change the main battery pack as 
follows: 
1.  Turn off the computer.  
2.  Close the screen cover and turn the 

computer over. 

3.  Slide the side battery latch (1) away 

from the battery. Continue to hold it 
until the battery is removed. 

4.  Push in the latch on the battery (2) 

while lifting the battery out of the 
compartment. Remove the battery. 

 

 

5.    Make sure the replacement battery is properly orientated. Slide 

back the side battery latch (1) then insert the battery into the 
battery compartment. Check that the latch locks back into 
position. 

 

The computer's processor has been specially designed to consume 
little power, and generates very little heat. However, working in a hot 
environment, or working for long periods may raise the temperature. 
Your computer takes the following steps to lower temperature: 

1.  The cooling fan will automatically turn on. You may feel air coming 

from a vent at the left side when this happens.  

2.  If the temperature continues to rise, processor activity will be 

reduced. You may notice a slight loss of performance when this 
happens. 

 

 

If the operating temperature exceeds 35 oC, 

the system will shut down to prevent the 
heat from damaging the computer’s 
infrastructure. When the computer cools to 
a normal temperature you can restart the 
system. The higher the temperature of the 
environment, the longer the period the 
computer will need to cool down.