KYE Systems Corp GKZGW Manuel D’Utilisation

 

2

The channel ID is factory preset. The green LED (data 

transmission indicator) will be lit constantly when the wireless 

device is in normal operation. In case your wireless devices do 

not work, please reset the ID channel by: 

1. 

Press the connect button on the receiver and the light will 

be blinking for connection.   

2. 

Press the connect buttons of the keyboard and mouse 

within 20 seconds. 

3. 

To confirm the connection of the wireless devices, the LED 

light will be lit constantly for approximately three seconds 

and will turn off after being connected.   

1. 

The charger device can be used to recharge both AA and 

AAA batteries; two batteries must be charged 

simultaneously. 

2.  Make sure that only rechargeable batteries (NiMH~ 

Nickle-Metal-Hydride) batteries are used and placed in the 

correct position. 

3. 

For safety, the charger features a recognition function for 

alkaline batteries placed and/or when the batteries are not 
placed in the correct polarity direction; resulting in 
charger’s LED Light to blink between green and red to 
indicate a warning.