KYE Systems Corp GMZHH Manuel D’Utilisation
Hardware Installation
1.
You can connect the receiver to a USB port of a PC or Notebook.
2.
If you want to connect the receiver to a PC or
recharge the batteries, please use the USB bat-
tery charger cable. (Please do not connect the
receiver directly to a PC that is placed under
a table, or the RF performance will decrease
dramatically.)
recharge the batteries, please use the USB bat-
tery charger cable. (Please do not connect the
receiver directly to a PC that is placed under
a table, or the RF performance will decrease
dramatically.)
3.
Install two AA rechargeable batteries in the
mouse. (Use only rechargeable batteries. Us-
ing any other type of battery could cause seri-
ous damage to your mouse or mainboard). Do
not charge batteries unless there are other
batteries in the mouse. Otherwise, you cannot use the mouse if you are
charging the batteries.
mouse. (Use only rechargeable batteries. Us-
ing any other type of battery could cause seri-
ous damage to your mouse or mainboard). Do
not charge batteries unless there are other
batteries in the mouse. Otherwise, you cannot use the mouse if you are
charging the batteries.
4.
Turn on your computer.
5.
After you open Windows, press the button on the receiver first, then press the
button under the mouse for channel setting.
button under the mouse for channel setting.
1
ENGLISH