KYE Systems Corp GMZI1 Manuel D’Utilisation

 

1

1.  You can connect the receiver to a PS/2 or USB port of a PC 
2.  Install two AA batteries in the mouse. 

 
 
 
 
 
 
 
 
 
 

3.  Turn on your computer. The mouse will now work. 
4.  After you open Windows, please press the button on the receiver first 

and then press the button under the mouse for channel setting. 

 
Important: Remember do not put the batteries in the wrong direction; use 
the same types of batteries. Also, keep all drinks away! If any spill occurs 
on the receiver, unplug the USB connector first and clean the receiver 
immediately. Please switch the button to "off" under the mouse once you 
don't use it for a long time, and remove the batteries if you do not use this 
device for at least two weeks. 
 

1.  Please do not use the wireless optical mouse on a desk which is made 

of glass, mirror, iron, or black velvet. Also, a flat surface is necessary 
or the optical sensor will be error easily. When you use the wireless 
optical mouse on a desk that is made of metal, try using a pad and 
reduce the receiving distance.   

2.  Before the first installation is completed (channel setting ready), the 

mouse will not work in DOS. 

3.  The wireless optical mouse channel provides 256 ID-codes, and it 

automatically selects the ID # for your mouse. You can only set up 
one wireless optical mouse at a time. But if you have additional 
wireless optical mouse sets in an area of 10 square meters, more 
interference will occur between the receiver and your mouse.