KYE Systems Corp GMZI7 Manuel D’Utilisation
15
(1) Access the Setup menu and select
「
Learning」 to begin learning
setup.
(2) Press the scroll key
to select
the device you want to learn, then
enter the device to learn each
single key. Learning process for
both soft and hard keys will be
done and shown on the screen.
Note: A key with “ ” mark means:
it’s a hard key.
enter the device to learn each
single key. Learning process for
both soft and hard keys will be
done and shown on the screen.
Note: A key with “ ” mark means:
it’s a hard key.
(3) Aim the transceiver of your original
remote control at the Learning Eye,
keep a distance of 2-4 inch. (5-10
cm)
keep a distance of 2-4 inch. (5-10
cm)
(4) Follow the wizard which guides you
to learn the key one by one, or
directly select keys you want to
assign codes to.
directly select keys you want to
assign codes to.
(5) Press a corresponding key on
original remote until “√” appears
beside the learning key and two
beeps are heard; then release the
key.
beside the learning key and two
beeps are heard; then release the
key.
(6) An “
X
” mark indicates that the learning has failed. Repeat step 5 until you see
the “√” symbol.