KYE Systems Corp GMZII Manuel D’Utilisation
ENGLISH
1
Hardware Installation
1. You can connect the receiver to a USB port of a PC.
2. Install two AAA batteries in the mouse.
3. Turn on your computer. The mouse can now work.
Software Installation
1. Make sure the mouse is connected to the computer.
2. Put the CD driver into the CD/DVD-ROM drive.
3. Follow the instructions on the screen to finish the software
1. You can connect the receiver to a USB port of a PC.
2. Install two AAA batteries in the mouse.
3. Turn on your computer. The mouse can now work.
Software Installation
1. Make sure the mouse is connected to the computer.
2. Put the CD driver into the CD/DVD-ROM drive.
3. Follow the instructions on the screen to finish the software
installation.
Warning: (Troubleshooting)
1. Do not use the wireless optical/laser mouse on a desk which is made
of glass or mirror.
2. The connection of the wireless device is factory preset, so when you
plug the USB receiver into any USB port, the connection between the
micro receiver and the mouse will be established automatically.
micro receiver and the mouse will be established automatically.
3. In case your PC did not install the hardware successfully, remove the
micro receiver from the USB port and go Human Interface Devices
under Device Manager to remove the mouse then plug in the micro
under Device Manager to remove the mouse then plug in the micro