KYE Systems Corp GMZIK Manuel D’Utilisation
Hardware Installation
1.
You can connect the receiver to a USB port.
2.
Install two AA batteries in the mouse.
3.
Turn on your computer.
4.
After you open Windows, please press the button under the receiver first and
then press the button under the mouse for channel setting.
then press the button under the mouse for channel setting.
Warning:
1.
Please do not use the wireless mouse on a desk which is made of glass, mirror,
iron, or black velvet. Also, a flat surface is necessary or the optical sensor will
error easily. If you use the wireless mouse on a desk that is made of metal, try
using a pad and reduce the receiving distance
iron, or black velvet. Also, a flat surface is necessary or the optical sensor will
error easily. If you use the wireless mouse on a desk that is made of metal, try
using a pad and reduce the receiving distance
2.
Before the first installation is completed (channel setting ready), the mouse will
not work in DOS.
not work in DOS.
3.
The wireless mouse channel provides 256 ID-codes, and it automatically selects
the ID # for your mouse. You can only set up one wireless mouse at a time. But
if you have additional wireless mouse sets in an area of 10 square meters, more
interference will occur between the receiver and your mouse.
the ID # for your mouse. You can only set up one wireless mouse at a time. But
if you have additional wireless mouse sets in an area of 10 square meters, more
interference will occur between the receiver and your mouse.
4.
If you feel the mouse does not move smooth as usual, then the batteries have lost
their charge, so please replace them. You should set up the channel every time
you replace the batteries.
their charge, so please replace them. You should set up the channel every time
you replace the batteries.
5.
The wireless mouse with radio frequency gives you free movement and an en-
joyable experience. For optimal performance, place the receiver at least 8 inches
(about 20 cm) away from the mouse and other electrical devices, such as the
computer, monitor, and etc.
joyable experience. For optimal performance, place the receiver at least 8 inches
(about 20 cm) away from the mouse and other electrical devices, such as the
computer, monitor, and etc.
6.
Press any button on the mouse when the mouse is in power saving mode.
1
ENGLISH