KYE Systems Corp GMZK5 Manuel D’Utilisation
English
- 1 -
Getting Started:
1. Before you can use this device, it needs to be charged, so
connect the micro USB cable to Ring Pointer and any
USB port on your PC. It takes approximately two hours
to fully charge.
2. Connect the pico receiver to a USB port of a PC or
notebook.
3. Make sure that you have turned on the power switch.
Button definitions:
Button Name
Button/Switch Function
P1
Previous Page
P2
F5 (Play) /ESC
P3
Next Page
P4
Laser Pointer
Other
Blank Screen
P5
Power
Function
On-Off
(Power On/Off; press for 3 seconds)
LED indicator
1. Charging status
a. Charging: LED always ON
b. Fully charged: LED turns off
2. Low battery -flashing light (low speed)
Presenter Mode Button Definition
P1: Press P1 to return to previous PowerPoint page.
P2: Press P2 to play the PowerPoint file and press again to exit the file.
P3: Press P3 to go to next PowerPoint page.
P4: Press P4 for laser pointer function
P5: Press P5 for blank screen or power on-off function: press for three seconds to change function.
※
Note: This mode works in Microsoft Office PowerPoint.
Battery Low indicator
When the power level is low, the Blue LED below the touch panel will flash to remind you that you need
to recharge Ring Pointer as soon as possible