KYE Systems Corp GMZK7 Manuel D’Utilisation
English
-1-
Hardware Installation
Note: Supports Windows 8/7/Vista/XP
1. Connect the Micro USB charging cable to the mouse to any PC USB port to
1. Connect the Micro USB charging cable to the mouse to any PC USB port to
charge the capacitor.
2. In charging mode, the red LED light will be on and will turn off when charged.
3. Connect the receiver to a USB port of a PC.
4. Make sure that you have switched on the power switch underneath the mouse.
3. Connect the receiver to a USB port of a PC.
4. Make sure that you have switched on the power switch underneath the mouse.
Remark:
It takes around five minutes to charge up the capacitor and you can use the mouse for
about four hours. Actual performance varies according to the conditions.
It takes around five minutes to charge up the capacitor and you can use the mouse for
about four hours. Actual performance varies according to the conditions.
Mouse Button Assignments
1. Left Button: Provides traditional mouse
functions like click, double click and drag.
2. Magic-Roller: Press the “Magic-Roller” to surf
the Internet and Windows documents.
3. Right Button: Provides traditional mouse click
functions.
4. DPI adjustment: Default is 1600 dpi, press once
for 800 dpi. Quick red flashing is 1600 dpi and
slow red flashing is 800 dpi.
slow red flashing is 800 dpi.
Note: Download the programmable driver from our website: www.geniusnet.com
Capacitor low indication
If the LED is flashing, then the capacitor level is low,
you need to recharge the mouse immediately.
you need to recharge the mouse immediately.
Micro USB charging cable storage
When you aren’t using the Micro USB charging cable,
you can put it inside the mouse.
you can put it inside the mouse.