KYE Systems Corp GMZKM Manuel D’Utilisation
English
1
Hardware Installation
1. You can connect the receiver to a USB port of a PC.
2. Install one AA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the
1. You can connect the receiver to a USB port of a PC.
2. Install one AA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the
mouse.
Factory Settings
1.
Left Button: Provides traditional mouse
functions like click double click and drag.
functions like click double click and drag.
2.
Magic-Roller: Press the “Magic-Roller” to
surf the Internet and Windows documents.
surf the Internet and Windows documents.
3.
Right Button: Provides traditional mouse
click functions.
click functions.
Warning: (Troubleshooting)
1.
Do not use the wireless optical/laser mouse
on a desk which is made of glass or mirror.
on a desk which is made of glass or mirror.
2.
The connection of the wireless device is
factory preset, so when you plug the USB receiver into any USB port, the
connection between the micro receiver and the mouse will be established
automatically.
factory preset, so when you plug the USB receiver into any USB port, the
connection between the micro receiver and the mouse will be established
automatically.
3.
In case your PC did not install the hardware successfully, remove the micro
receiver from the USB port and go Human Interface Devices under
Device Manager to remove the mouse then plug in the micro receiver to a
USB port again.
receiver from the USB port and go Human Interface Devices under
Device Manager to remove the mouse then plug in the micro receiver to a
USB port again.
4.
If you feel the mouse does not move smooth as usual, it is possible the
batteries have lost their charge so you need to replace them. Remember to
put the batteries in the correct direction.
batteries have lost their charge so you need to replace them. Remember to
put the batteries in the correct direction.