KYE Systems Corp GMZKY Manuel D’Utilisation
KYE SYSTEMS CORP.
English
2
double click and drag.
2.
Magic-Roller: Press the “Magic-Roller” to surf the Internet
and Windows documents.
and Windows documents.
3.
Right Button: Provides traditional mouse click functions.
4.
Button: Press and hold this button for two seconds to turn it on. The power
level LED indicators will flash three times and the display battery’s capacity.
5.
Power Level LED indicators: When the charge is completed, the four LEDs will
stay on for 10 minutes, and then turn off for power saving.
stay on for 10 minutes, and then turn off for power saving.
● LED On ○ LED Off ⊙ LED Blinking
Remark: Power level low indication
If the LED is flashing five times, then the power level is low, and you need to
recharge the mouse immediately.
Note: Download the programmable driver from our website: www.geniusnet.com
Remark: Power level low indication
If the LED is flashing five times, then the power level is low, and you need to
recharge the mouse immediately.
Note: Download the programmable driver from our website: www.geniusnet.com
Warning: (Troubleshooting)
1.
1.
Make sure the Energy Mouse is completely charged before first usage.
2.
Use the standard cable or it could cause damage to Energy Mouse.
3.
Confirm the voltage of the mobile device is 5V before you use Energy Mouse to
charge it.
charge it.
4.
To maintain the life span and quality of Energy Mouse battery, we recommend
you unplug the power cable promptly after Energy Mouse is fully charged and
fully charge it every four months.
you unplug the power cable promptly after Energy Mouse is fully charged and
fully charge it every four months.
5.
Do not drop, knock, disassemble or attempt to repair Energy Mouse by yourself or
you will void the warranty. If there is any problem, you can contact a service
center for assistance.
you will void the warranty. If there is any problem, you can contact a service
center for assistance.
6.
Do not leave Energy Mouse in a vehicle, expose it to sunlight or put it near any
heat source for a long time as strong light and high temperature will lead to
battery damage.
heat source for a long time as strong light and high temperature will lead to
battery damage.
7.
Store Energy Mouse in a cool, dry place, and keep it away from fire and moisture.
8.
Do not put any object (except the USB cable) into any of the Energy Mouse micro
USB input or USB output ports to avoid short circuit damage.
USB input or USB output ports to avoid short circuit damage.
9.
Keep Energy Mouse away from children and pets. Do not use the wireless
optical/laser mouse on a desk which is made of glass or mirror.
optical/laser mouse on a desk which is made of glass or mirror.
10.
The connection of the wireless device is factory preset, so when you plug the
USB receiver into any USB port, the connection between the micro receiver and
the mouse will be established automatically.
USB receiver into any USB port, the connection between the micro receiver and
the mouse will be established automatically.
11.
In case your PC did not install the hardware successfully, remove the micro
receiver from the USB port and go Human Interface Devices under Device
receiver from the USB port and go Human Interface Devices under Device
LED
Indicators
Indicators
●●●●
●●●○
●●○○
⊙○○○
Blinking
Power Level
100-75%
75-50%
50-25%
25-5%