KYE Systems Corp GMZL7 Manuel D’Utilisation
Traveler 9000
(
GM-100017-V2
)
English
1
Hardware Installation
1. You can connect the receiver to a USB port of a PC.
2. Install one AAA battery in the mouse.
1. You can connect the receiver to a USB port of a PC.
2. Install one AAA battery in the mouse.
3. Make sure that you have switched on the power switch underneath the
mouse.
4. This product has two storage locations, inside the slot just one storage
location.
Factory Settings
1. Left Button: Provides traditional mouse functions like click, double click
and drag.
2. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows
documents.
3. Right Button: Provides traditional mouse click functions.
Warning: (Troubleshooting)
1. Do not use the wireless optical/laser mouse on a desk which is made of
Warning: (Troubleshooting)
1. Do not use the wireless optical/laser mouse on a desk which is made of
glass or mirror.
2. The connection of the wireless device is factory preset, so when you plug
the USB receiver into any USB port, the connection between the micro
receiver and the mouse will be established automatically.
receiver and the mouse will be established automatically.
3. In case your PC did not install the hardware successfully, remove the micro
receiver from the USB port and go Human Interface Devices under
Device Manager to remove the mouse then plug in the micro receiver to a
USB port again.
Device Manager to remove the mouse then plug in the micro receiver to a
USB port again.
4. If you feel the mouse does not move smooth as usual, it is possible the
batteries have lost their charge so you need to replace them. Remember to
put the batteries in the correct direction.
put the batteries in the correct direction.