Tun Healthcare Limited 4100430 Manuel D’Utilisation
Installation and user guide
Page 3 of 20
Introduction
The 312 MHz Universal Sensor is a telecare sensor intended
for use with Tunstall Personal Emergency Response Systems
(PERS) operating on the frequency 312MHz. Please refer to
the Tunstall PERS documentation for compatibility and
related information.
The Universal Sensor is predominantly used either as a door
usage sensor (using the supplied door contacts), connected
to a bed sensor mat or connected to other devices that are
required to send radio messages to the Tunstall PERS.
The Universal Sensor;
for use with Tunstall Personal Emergency Response Systems
(PERS) operating on the frequency 312MHz. Please refer to
the Tunstall PERS documentation for compatibility and
related information.
The Universal Sensor is predominantly used either as a door
usage sensor (using the supplied door contacts), connected
to a bed sensor mat or connected to other devices that are
required to send radio messages to the Tunstall PERS.
The Universal Sensor;
Can be used either with external switching contacts or
the internal reed switch and is configurable for normally
open or normally closed switching contacts.
the internal reed switch and is configurable for normally
open or normally closed switching contacts.
Is fitted with an RJ11 socket for connection to the
Tunstall bed sensor mat (part number D4106009A or
S2010004) for use as part of a virtual sensor application
or for sending activities of daily living data (ADLife).
Tunstall bed sensor mat (part number D4106009A or
S2010004) for use as part of a virtual sensor application
or for sending activities of daily living data (ADLife).
Is fitted with an external on/off switch which can be used
to switch the Universal Sensor on or off if necessary.
This switch can optionally be disabled by a configuration
setting (see
to switch the Universal Sensor on or off if necessary.
This switch can optionally be disabled by a configuration
setting (see
‘How to Configure’), if it is important that the
Universal Sensor should not be switched off.
Can be easily configured to generate different radio
messages that are appropriate to the equipment that the
Universal Sensor is connected to. This allows ‘plug and
play’ operation with Tunstall’s range of home units.
messages that are appropriate to the equipment that the
Universal Sensor is connected to. This allows ‘plug and
play’ operation with Tunstall’s range of home units.
Incorporates an LED to indicate when the Universal
Sensor has been activated
Sensor has been activated
Is powered by an internal battery with a minimum life of 5
years (typical usage). This battery is automatically tested
and when found to be low, an automatic radio signal will
be sent to the Tunstall PERS.
years (typical usage). This battery is automatically tested
and when found to be low, an automatic radio signal will
be sent to the Tunstall PERS.