Taiwan Carol Electronics Co Ltd CAROLDW25R Manuel D’Utilisation
2. Parts and Functions:
2.1 DW‐25R Digital Wireless Receiver(as shown in Figure 2.1)
(1) Power Switch: Switches on/off the Receiver, with status LED.
(2) Antenna: Receives signals from the microphone. The angle of the antennas can be
adjusted leftward, rightward or backward.
(3) Mic A Connecting LED: Lights up when microphone A is successfully connected.
(4) Mic B Connecting LED: Lights up when microphone B is successfully connected.
(5) Mic B Volume Controller: Controls the output volume of microphone B.
(6) Mic B Reset Button: Resets microphone B signals.
(6) Mic B Reset Button: Resets microphone B signals.
(FOR TECHNICIANS USE ONLY)
(7) ø 6.3mm Female Jack: Connects to the signal output of an amplifier.
(8) Mic A Reset Button: Resets microphone A signals.
(8) Mic A Reset Button: Resets microphone A signals.
(FOR TECHNICIANS USE ONLY)
(9) Mic A Volume Controller: Controls the output volume of microphone A.
(10) DC Power Receptacle: Connects DC adapter. The polarity of central pole is positive.
(11) Cable Clasp: For secure the power cable.
(10) DC Power Receptacle: Connects DC adapter. The polarity of central pole is positive.
(11) Cable Clasp: For secure the power cable.
Figure 2.1
2.2 DW‐25T Handheld Digital Wireless Microphone(as show in Figure 2.2)