Sun Nuclear Corporation 1136 Manuel D’Utilisation
Wall brackets
13
Figure 2-7. Connections with multiple wired and wireless pods
Wall brackets
Two types of wall brackets are furnished:
•
•
The charging wall bracket (P/N 1133210) is mounted on the treatment room wall and contains
powered mounting slots for the Base Station and the Detector Pod (Figure 2-8). DC power is
supplied to the wall bracket. When the Pod is removed for daily use, it becomes battery pow-
ered. At the end of a patient session and at the end of the day, the Pod is returned to its slot
in the wall bracket to be charged to full capacity overnight.
•
powered mounting slots for the Base Station and the Detector Pod (Figure 2-8). DC power is
supplied to the wall bracket. When the Pod is removed for daily use, it becomes battery pow-
ered. At the end of a patient session and at the end of the day, the Pod is returned to its slot
in the wall bracket to be charged to full capacity overnight.
•
Attach the charging wall bracket to the treatment room wall with two suitable screws to
fit the slotted holes in the back of the wall hanger.
fit the slotted holes in the back of the wall hanger.
•
Feed the 6-conductor flat cable from the Control Module through the hole in the left side
and connect to the Base Station.
and connect to the Base Station.
•
Place the Base Station on left side of the wall bracket. Charging power is provided via the
6-conductor flat cable from the Control Module.
6-conductor flat cable from the Control Module.
•
Place the Pod in the right side of the wall bracket. If desired, diode leads can be left
attached to the Pod, and the diodes can be inserted in the slots on the front of the wall
bracket.
attached to the Pod, and the diodes can be inserted in the slots on the front of the wall
bracket.