Sun Nuclear Corporation 1136 Manuel D’Utilisation
About the PC software
41
4
Software operation
About the PC software
The PC software is included on the compact disk (CD) with each system. The PC software lets you
operate the system with your personal computer. The software operates on any PC with Windows
95 and higher.
operate the system with your personal computer. The software operates on any PC with Windows
95 and higher.
When using a computer, the buttons and display on the Control Module are inactive. You can con-
trol the system with either the computer or the Control Module, but you can’t use them
simultaneously.
trol the system with either the computer or the Control Module, but you can’t use them
simultaneously.
When the Control Module senses that the PC software is active and connected, the Control Mod-
ule display shows “System under PC Control. 30” If the PC software is switched off or loses
connection, the Control Module counts down from 30 seconds before resuming control.
ule display shows “System under PC Control. 30” If the PC software is switched off or loses
connection, the Control Module counts down from 30 seconds before resuming control.
To print reports when using the computer, connect any standard computer printer to your com-
puter. When using PC software, the thermal printer is not used. You can also use a printer on your
network. Computer reports are full page and have a different format and appearance than the Con-
trol Module reports. An additional feature of the computer is the ability to print multiple exposures
in a single report.
NOTE: To measure with multiple Pods, you must use the PC software. You cannot use the Control
Module with more than one detector pod (up to 4 diodes).
puter. When using PC software, the thermal printer is not used. You can also use a printer on your
network. Computer reports are full page and have a different format and appearance than the Con-
trol Module reports. An additional feature of the computer is the ability to print multiple exposures
in a single report.
NOTE: To measure with multiple Pods, you must use the PC software. You cannot use the Control
Module with more than one detector pod (up to 4 diodes).
To install the software
1
To install the software on your PC, place the CD in the CD drive and wait for the opening
screen to appear.
screen to appear.
2
If autorun is not enabled on your CD drive, navigate to the CD drive and double-click on the
file “SunNuclearCorp.exe” to open the menu.
file “SunNuclearCorp.exe” to open the menu.
3
From the menu, select the option to install software for the IVD.
NOTE: The CD also contains software and documentation for other Sun Nuclear Corporation
products.
products.
4
Follow the on-screen directions.
To launch and close the software
To launch the software
1
1
To launch the IVD software, double-click the IVD icon on the desktop.
2
If the desktop icon is missing, select Start > Programs > SNC Group >IVD.
To close the software
To close the software, click on the “X” in the upper right corner or select Exit from the File menu.
To remove the software
1
To remove the IVD software, select Start > Settings > Control Panel > Add or Remove
Programs.
Programs.
2
Select IVD Version (version no.) from the list of programs, and click Remove.
3
Follow the on-screen directions.
Opening view
Once the initialization and system check are complete, the Dose view will be displayed.