Elster Solutions LLC HHI03 Manuel D’Utilisation
12
MANAGING HOME AREA
NETWORK DEVICES
Certain REX and REX2 meters may be home area network enabled using a
ZigBee network interface card (ZigBee NIC). The meter communicates to the
ZigBee NIC relaying information such as consumption. The ZigBee NIC uses the
HAN radio to communicate with a variety of home area devices such as in home
displays, programmable thermostats, etc.
ZigBee network interface card (ZigBee NIC). The meter communicates to the
ZigBee NIC relaying information such as consumption. The ZigBee NIC uses the
HAN radio to communicate with a variety of home area devices such as in home
displays, programmable thermostats, etc.
EA_Inspector allows you to perform the following commands on a ZigBee NIC:
•
•
Note:
Meters that support ZigBee NIC are REX2 meters with firmware
versions 2.x and higher.
versions 2.x and higher.
Within the HAN menu items, once a user enters a Serial Number or LAN ID, that
number or LAN ID will be saved and reshown on each HAN screen. If the user
exits the HAN menu below and returns to the main menu, the Serial Number or
LAN ID will be reset to blank.
number or LAN ID will be saved and reshown on each HAN screen. If the user
exits the HAN menu below and returns to the main menu, the Serial Number or
LAN ID will be reset to blank.
HAN device-related screens show the device numbers as the number returned
from the ZigBee NIC (in the range of 0 to 7).
from the ZigBee NIC (in the range of 0 to 7).
EA_Inspector also allows you to perform the following commands on a 900 MHz
HAN device:
HAN device:
•
•
•
•
Note:
You must have Program 900 MHz HAN privileges to access the
Configure command.
Configure command.
EA_Inspector User Guide