Thomson 2-1230A Manuel D’Utilisation

You must install the battery pack prior to first use or you will not
be able to use the cordless handset. If a battery pack is not
installed or battery power is low, the low battery icon shows in
the display and you need to recharge the handset or replace the
battery pack. Make sure that the cordless handset is in the
standby mode before you install or replace the battery.

1. Remove the battery compartment door from the cordless

handset.

2. If you are installing the battery pack for the first time, insert

the battery pack into the battery compartment on the back
of the cordless handset then plug the battery pack cord into
the jack inside the handset battery compartment.

3. If you are replacing the battery pack, disconnect the battery

pack cord from the jack inside the battery compartment and
remove the battery pack from the cordless handset. Insert a
new battery pack and reconnect the battery pack cord to the
jack inside the handset battery compartment.

4. Put the battery compartment door back on.

•

Do not burn, disassemble, mutilate, or puncture. Like other
batteries of this type, toxic materials could be released which
can cause injury.

•

Keep batteries out of the reach of children.

•

Remove batteries if storing over 30 days.