Thomson 2-1230A Manuel D’Utilisation

Page de 68
15
7. Place the handset in the base cradle. The system
automatically registers the handset to the base.
The display shows:
After three seconds the display returns to the previous menu and
shows:
NOTE:
1. If you need to register additional handsets follow the steps above. You
may register up to eight handsets.
2. If an additional handset has never been registered to any base before,
you only need the base to enter the REGISTRATION mode then put the
handset (with its battery prior charged by the charge cradle) on the base
to register automatically, as described above. However, if the handset
you’re registering has been registered before, you would need both the
base and the handset to enter into REGISTRATION mode, and then put
the handset in the base to register. To let handset enter into
REGISTRATION mode, simply follow the same steps, as you would do on
the base.
Displays and Display Messages
Icons
Meaning
“NEW” icon
The incoming call is a new call and the CID
record is not viewed before.
“REPT” icon
The incoming call has been received before,
but the CID record is not viewed before.
“CALL” icon
CID is being displayed on the LCD
“MEMO” icon
Memory (Phone Book Directory) record is
being displayed on the LCD
“AM” icon
Indicate the Time showing is Morning
“PM” icon
Indicate the Time showing is Afternoon
“L1” / “L2” icon
1.) Turn on when the corresponding telephone
line is in use.
2.) To display which line received the CID
record during the CID review.
“18 : 88” icons
To display the time
“18 / 88” icons
To display the date
“# 88” icons
CID / Directory database index
Connections and Set Up
Base Display
Cordless Handset
REGISTERED
HANDSET 
 # 2
REGISTRATION
RESET
HANDSET 
 # 1
L1:  TALK    L2;  HOLD
L1  L2  18:88  AM  18/88  NEW  CALL #88
PM   REPT  MEMO
SUN   12:00   AM
L1:  TALK    L2:   HOLD
L1  L2  18:88  AM  18/88  NEW  CALL #88
PM   REPT  MEMO