Thomson 2-1230A Manuel D’Utilisation
19
Connections and Set Up
3. Press PROGRAM/OK.
4. For Line 1, use the
/ button to select L1 PASSWORD.
5. Press PROGRAM/OK again.
6. Select the designated mailbox number (Mailbox 101 or 102).
7. Use the touch-tone pad to enter your new 3-digit password.
8. Press PROGRAM/OK to confirm and save.
9. Repeat steps 3 through 8 to set the mailbox password for
line 2.
NOTE: If you decide to keep the factory default password (101 for
Mailbox 1 and 202 for Mailbox 2), press the DELETE button two times. The
display shows:
Mailbox 1 and 202 for Mailbox 2), press the DELETE button two times. The
display shows:
NOTE: After three seconds, the display returns to the main menu, or you
may press the EXIT button to quit the program menu.
may press the EXIT button to quit the program menu.
Day and Time
You may set the mailbox day and time stamp for new messages.
The default value is SUNDAY 12:00AM.
The default value is SUNDAY 12:00AM.
Although the system automatically updates the display day and
time data from Caller ID information, it is recommended that
you manually set the day and time information prior first use.
time data from Caller ID information, it is recommended that
you manually set the day and time information prior first use.
1. Press the PROGRAM/OK button.
2. Use the
/ button to scroll to DAY AND TIME.
3. Press PROGRAM/OK again. The day mode shows in the
display.
L1 PASSWORD
L2 PASSWORD
L2 PASSWORD
L1 PASSWORD
DELETE?
DELETE?
L1 PASSWORD
101 OK!
101 OK!
DAY AND TIME
PRIME LINE
PRIME LINE
DAY AND TIME
FRI
FRI
DAY AND TIME
FRI 06:12
FRI 06:12
4. Use the
/ button to select the day. For example, if you
select Friday the display shows:
5. Press PROGRAM/OK to confirm and save. Time mode shows
in the display.
6. Use the touch-tone pad to enter the 4-digit number for time
of day (for example, press 0612 to enter the time as 6:12).
7. Press PROGRAM/OK to confirm and save. AM/PM mode
shows in the display.