Thomson 2-1230A Manuel D’Utilisation

Page de 68
43
Telephone Operation
Three-way Conferencing with External Calls
Since this is a two-line phone, you may conduct a 3-way
conference call with two outside lines.
1. During a call, press the HOLD button to put LINE 1 on hold.
2. Press the LINE 2 button, and dial a telephone number. Or
answer an incoming call on LINE 2.
3. Press the CONF button to establish a 3-way conference with
the two external calls. Your display shows:
4. When finished, press CONF again, or place your handset on
the base cradle to hang up both lines.
5. Or, you may press the LINE 1 button to keep the call on line
one and drop the call on LINE 2, or press the LINE 2 button
to keep the call on LINE 2 and drop the call on LINE 1.
NOTE: During your 3-way conference call, you may press the HOLD
button to place the external calls on hold.
NOTE: During your external 3-way conference, internal handsets are
unable to join the conference. If a user at a registered handset presses a
line button during an external 3-way conference call, the display shows:
Caller ID (CID)
VERY IMPORTANT: In order to use all of the features of this telephone,
you must subscribe to either the standard Name/Number Caller ID
Service or Caller ID with Call Waiting Service. To know who is calling
while you are on the phone, you must subscribe to Caller ID with Call
Waiting.
Caller ID (CID) is a call identification service available from your
local telephone company. To receive CID information on this
system, you must subscribe to CID service through your local
telephone company.
When your telephone rings, and you are subscribed to Caller ID
service, your cordless telephone receives CID information (if
available) transmitted from your local telephone company
CONF   MM:SS
L1  L2
035775141
SYSTEM  BUSY