Thomson 2-5110A Manuel D’Utilisation
15
Installing the Earpiece Battery
NOTE: You must connect the earpiece battery before use.
1. Locate the battery compartment inside the headset.
2. Plug the battery pack cord into the jack inside the compartment.
NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the
compartment. To ensure proper battery installation, the connector is keyed and can be
inserted only one way.
4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into place.
5. Close the battery compartment by pushing the door up until it snaps into place.
6. Place the headset in the charging cradle.
Allow the headset to charge for 16 hours prior to first use. If you don’t properly charge the
Allow the headset to charge for 16 hours prior to first use. If you don’t properly charge the
headset, battery performance is compromised.
CAUTION: To reduce the risk of fire or personal injury, only use ATLINKS Li-polymer
battery model 5-2682.
Connections & Setup