Thomson 2-6976A Manuel D’Utilisation
32
NO DATA
No Caller ID information was received.
EMPTY
Indicates a memory location is vacant.
NO CALLS
Indicates no CID records have been stored.
MESSAGE WAITING Indicates a message is available.
H
ANDSET
S
OUND
S
IGNALS
Signal
Meaning
A long warbling tone
Signals an incoming call
(with ringer on)
Two long beeps
Confirmation Tone
One short and one long beep
Page signal
One short beep
Low battery warning
every seven seconds
H
EADSET
AND
B
ELT
C
LIP
O
PERATION
C
ONNECTING
AN
O
PTIONAL
H
EADSET
TO
THE
H
ANDSET
For hands free conversation, connect the headset (optional) to the
HEADSET jack as shown. The handset receiver and microphone are
disabled when the headset is connected.
HEADSET jack as shown. The handset receiver and microphone are
disabled when the headset is connected.
TIP:
To order a headset, please refer to the accessory order form at the
end of this user’s guide.
Adjust the headset to rest comfortably on top of your head and over your
ear. Move the microphone to approximately 2 to 3 inches from your mouth.
ear. Move the microphone to approximately 2 to 3 inches from your mouth.
•
Press the TALK/callback button to answer or place a call before using
the headset.
C
ONNECTING
THE
B
ELT
C
LIP
There are two slots, one on each side of the handset.
•
Attach the belt clip by inserting the sides of the belt clip into the slots.
Snap the ends of the belt clip into place.