Thomson 2-7909AH Manuel D’Utilisation

 

1

 

 

Your telephone equipment is approved for connection to the Public 
Switched Telephone Network and is in compliance with parts 15 and 
FCC Rules and Regulations and the Technical Requirements for 
Telephone Terminal Equipment published by ACTA. 
1 Notification to the Local Telephone Company 
On the bottom of this equipment is a label indicating, among other 
information, the US number and Ringer Equivalence Number (REN) 
for the equipment. You must, upon request, provide this information to 
your telephone company. 
The REN is useful in determining the number of devices you may 
connect to your telephone line and still have all of these devices ring 
you’re your telephone number is called. In most (but not all) areas, the 
sum of the RENs of all devices connected to one line should not 
exceed 5. To be certain of the number of devices you may connect to 
your line as determined by the REN, you should contact your local 
telephone company. 
A plug and jack used to connect this equipment to the premises wiring 
and telephone network must comply with the applicable FCC Part 68 
rules and requirements adopted by the ACTA. A compliant telephone 
cord and modular plug is provided with this product. It is designed to 
be connected to a compatible modular jack that is also compliant. See 
installation instructions for details. 
Notes 
‧ This equipment may not be used on coin service provided by the 
telephone company. 
‧ Party lines are subject to state tariffs, and therefore, you may not be 
able to use your own telephone equipment if you are on a party line. 
Check with your local telephone company. 
‧ Notice must be given to the telephone company upon permanent 
disconnection of your telephone from your line. 
‧ If your home has specially wired alarm equipment connected to the 
telephone line, ensure the installation of this product does not disable