Thomson 2-7951AH Manuel D’Utilisation
5
Making a Call
1. Press the
TALk/END button. Dial the desired number.
- OR -
Dial the number first, then press the
Dial the number first, then press the
TALk/END button.
. When finished, press the
TALk/END button or put the handset
back into the base cradle to hang up.
NOTE: If you want to delete the pre-dial number you
entered, press the MUTE/ringer on/off button until all of the
digits are erased.
Answering Calls
1. When the phone rings, press the
TALk/END button.
- OR -
Press the
Press the
SPEAkER button on the base.
. When finished, press the
TALk/END button on handset or the
SPEAkER button on base, or put the handset back into the base
cradle to hang up.
NOTE: If you have turned the Auto Talk function on, you can
pick up the handset from the base to answer the incoming
call directly, without pressing any buttons.
NOTE: Adjust the handset volume by pressing the CID/VOL
(3or4) button during a call.
NOTE: If you press the SPEAkER button to answer a call
while the handset is not in the base cradle, the call will not
be ended even when you place the handset back into the
base cradle during the conversation.
Inserting a Pause in the Dialing Sequence
Press the
#PAUSE button twice to insert a delay in dialing
sequence when a pause is needed to wait for a dial tone (for