Thomson 2-8127AH Manuel D’Utilisation
39
Auto Standby
Placing the cordless handset in the charge cradle while the handset is
Off the hook
(or during a call) automatically hangs up the handset.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call Waiting
calls. During a phone call, you will hear a beep to indicate another call is waiting on the
line and Caller ID information for the waiting call shows on the handset display.
• To connect to the waiting call, press the
telephone company, you will receive Caller ID information (if available) on Call Waiting
calls. During a phone call, you will hear a beep to indicate another call is waiting on the
line and Caller ID information for the waiting call shows on the handset display.
• To connect to the waiting call, press the
DELETE/flash button on the handset, and
your original call is put on hold.
• To switch between the two calls, press the
DELETE/flash button.
NOTE: Some cellular phones do not support this feature, refer to
your cellular devices instruction Manual.
Last Number Redial
You may redial a number up to 3 digits long.
To quickly redial the last number you dialed:
1. Press the
To quickly redial the last number you dialed:
1. Press the
TALK or SPKR button on the handset or press the Cell (SKR) to dial the
number.
. Press the
button.
-
OR-
To quickly choose from any of the last three numbers you dialed:
1. Press the
1. Press the
button first, then use the
or
button to select the
desired redial number.
. Press the
TALK or SPKR button on the handset, the number dials automatically.
-
OR-
If you get a busy signal and want to keep dialing the number, press the
button
to quickly redial the number.
Page
The page feature helps you locate a misplaced handset. To send and receive
pages, all handsets must be registered. If your handset is not registered, follow the
instructions in the Registration section of this manual.
pages, all handsets must be registered. If your handset is not registered, follow the
instructions in the Registration section of this manual.