Thomson 2-9111A Manuel D’Utilisation

81

Unit locks up and no communication between the base and 

cordless handset
•  Unplug the power adaptor from the electrical outlet and 

the back of the base. Remove the handset battery. Wait 

for 0 seconds and plug the power adaptor back into the 

base and electrical outlet. Reconnect the battery and 

charge for 16 hours.

No Display
•  Charge the battery (for 16 hours). Or replace the battery.
•  Make sure the unit is connected to a non-switched 

electrical outlet. Disconnect the power adaptor from the 

base and reconnect it.

Caller ID Error Message
•  The unit displays this message if it detects anything other 

than valid Caller ID information during the silent period 

after the first ring. This message indicates the presence of 

noise on the line.

No Caller ID
•  You must be subscribed to the standard Name/Number 

Caller ID service from your local telephone company to 

receive CID information.