Columbia Telecommunications Group Inc RC16FF49 Manuel D’Utilisation

 

1

1:6 SCALE RC CAR 

MODEL: RC-16FF                                           

 

INSTRUCTION MANUAL 

 

1:6 RC CAR COMPONENTS: 

1.  Transmitter antenna 

2.  Indicator Lamp 

3.  Steering Wheel 

4.  Transmitter on/off Switch 

5.  Speed Control Trigger 

6.  Transmitter Battery Compartment Cover 

7.  Car Battery Compartment Cover 

8.  Bumper 

9.  Dial 

10.  Car On/Off Switch 

11.  Body 

12.  8pcs “AA” batteries 

13.  Rechargeable Battery 

14.  Charger/ Adaptor 

 

I.    INSERTING REMOTE CONTROL’S BATTERY 

Insert 8pcs of “AA” batteries into the remote control’s battery compartment. Always use fresh 

batteries and install them properly. 

1.  Use a screw driver to unscrew the battery compartment cover. 

2.  Slide open remote control’s battery cover. 

3.  Insert 8pcs of “AA” batteries with correct polarity as indicated on the battery compartment. 

Make sure the connections are secured. 

4.  Close and screw back the remote control’s battery cover. 

 

1.  Test the battery connection by moving the remote control’s On/Off switch to the “ON” 

position. The indicator lamp should light up. If not, please make sure the batteries are new. 

Inserted correct polarity, And are inserted properly. 

2.  If the indicator lam starts blinking or turns off during operation, the battery is depleted and 

should be replaced. 

3.  Remember to remove batteries when not in use.