Xirgo Technologies Inc. XT4975A Manuel D’Utilisation

 

 

              

9 

 

An optional trailer mounting cradle can be purchased for easy device mounting for the XT4975A. 

The cradle will need to be screw-mounted or VHB Tape mounted to the position desired. The 

XT4975A can be easily fastened into the cradle via a Phillips head screw. The angled edged of the 

cradle is designed to withstand the impact of snow scrapers that may come in contact to the 

cradle if mounted on the top of a typical trailer. Inside the body of the cradle where the device sits 
are four drain holes. Do not use the drain holes for screw mounting cradles to surfaces. 

 

 

 

An optional container cradle can be purchased for easy device mounting for the XT4975A. The 

container cradle is designed for VHB Tape mounting only. The XT4975A can be easily fastened 

into the cradle via a Phillips head screw. The shape of the cradle is designed to fit in the 

corrugations of an ISO standard freight container. Inside the body of the cradle where the device 
sits are four drain holes. Do not use the drain holes for screw mounting cradles to surfaces. 

 

DRAIN HOLES 

DRAIN HOLES