Compal Electronics Inc T0022100 Manuel D’Utilisation
Chapter 4 Using Your Motion M1200 and M1300 Tablet PCs
Motion Computing M1200 and M1300 Tablet PC User Guide 38
1. Right-click on the Power/Battery icon in the System
Tray, located in the lower right-hand corner of the display
window. Tap Adjust Power Properties in the menu. This
opens Power Options Properties. Or, go to the Control
Panel and select Power options.
window. Tap Adjust Power Properties in the menu. This
opens Power Options Properties. Or, go to the Control
Panel and select Power options.
2. Under Power Schemes, tap the down arrow to display a list of
schemes.
3. Select Max Battery as your power scheme.
4. Tap apply.
4. Tap apply.
C
HARGING
THE
B
ATTERY
When you connect the Tablet PC to AC power with the battery installed, the
system automatically charges the battery until it reaches full charge (100%).
system automatically charges the battery until it reaches full charge (100%).
The Battery Status LED glows steady amber while the battery is charging
and changes to steady green when charging is complete.
and changes to steady green when charging is complete.
WARNING: To avoid personal injury, if the battery is overheated, wait
until it cools to room temperature before recharging or replacing it with
another battery.
until it cools to room temperature before recharging or replacing it with
another battery.
To charge the battery at any time:
1. Plug the AC power adapter into the Tablet PC, then into a wall outlet
or power strip. (Completely recharging the battery may take up to
two hours, although the battery reaches an 80% charge in much less
time.)
two hours, although the battery reaches an 80% charge in much less
time.)
2. To check the battery power, move the Pen over the
Power/Battery icon. This shows you the number of
hours of battery power and the percentage of battery
power left. (The blue area on the battery icon shrinks as
the battery runs down.)
hours of battery power and the percentage of battery
power left. (The blue area on the battery icon shrinks as
the battery runs down.)
3. Or, turn the Tablet PC over to view the battery gauge on the bottom
of the Tablet PC.
4. Press the button next to the battery gauge. If all five LEDs are green,
the battery is fully charged.
C
HANGING
THE
B
ATTERY
You can change the battery while the system is powered on, with or without
having the Tablet PC plugged into an AC power outlet.
having the Tablet PC plugged into an AC power outlet.
1. If the Tablet PC is running, save all active files.
2. Open the Dashboard and tap Properties under Power Management.
3. Select the Hibernate tab and make sure the box beside Hibernate is
2. Open the Dashboard and tap Properties under Power Management.
3. Select the Hibernate tab and make sure the box beside Hibernate is
checked. (The default is Enabled.)
4. Go to Start>Turn Off Computer.
5. When the Turn Off Computer window appears, press the Shift key on
5. When the Turn Off Computer window appears, press the Shift key on
your external keyboard or tap Shift on the Tablet PC Input Panel key-
board to change the option from Stand By to Hibernate.
board to change the option from Stand By to Hibernate.
6. Tap Hibernate. The Tablet PC displays that it is Hibernating.
7. Wait until the system shuts down and all LEDs are off.
7. Wait until the system shuts down and all LEDs are off.