Suncon Toys Industry Ltd 604436R Manuel D’Utilisation

Page de 5
 
Owner’s Manual draft as below: 
 
RadioShack 
1969 CHEVROLET CAMARO HOT ROD 
60-4436 
 
what’s included 
Vehicle, transmitter,  box wrench 
 
Step One 
Installing Batteries 
You will need… 
One 9
-
V
olt
 battery for the transmitter
 (not supplied).
 
One 7.2
-
V
olt rechargeable nickel-cadmium (Ni-Cd) or nickel-metal-hydride (Ni-MH),
 battery 
pack for the CAMARO
 (not supplied). 
The rechargeable battery pack and battery pack charger, as well as alkaline battery, are available 
at your local RadioShack store.
 
 
 
Put Batteries in the CAMARO 
· Turn off the Vehicle
 
Use a coin to turn the latches on the battery compartment cover toward OPEN. Lift and remove 
the cover.
 
·  Insert the battery pack with it’s connector on the same side as the vehicle’s connector. 
·  Attach the battery pack and the vehicle connectors. They fit together only one way. Do not 
force them. 
·  Replace the cover
 and turn the latches to secure it
 
Put Battery in the Transmitter 
. Open the battery compartment cover. 
. Insert one 9V battery in the battery compartment, and match the polarity symbols (+ and -) as 
marked inside.   
. Replace the cover and snap it shut.
 
 
NOTE: 
-  ·  If your vehicle does not respond to the transmitter or the transmitter’s range 
decreases, replace the 9V batteries in the transmitter.   
서식 있음: 글머리 기호 및
번호 매기기
삭제됨rear and
삭제됨(neither supplied) 
삭제됨·  Remove the battery 
compartment cover.