Psion Inc 7505BTMW Manuel D’Utilisation

Set this parameter to on to enable “Code 128”.

Previously UPC/EAN and UCC, these types of bar codes include group separators and 
start codes.

To successfully scan this variation, “Enable ISBT 128” must be set to on.

If this parameter is set to on, one of three decode levels assigned to the Decode Performance 
Level parameter can be selected.

This parameter provides three levels of decode performance or “aggressiveness” for Code 
128 symbols. Increasing the performance level reduces the amount of required bar code ori-
entation—this is useful when scanning very long and/or truncated bar codes. Keep in mind 
that increased levels reduce decode security.

When you double-tap on this parameter, a dialog box is displayed in which you can enter a 
decode performance level of between 1 and 3.

Refer to page 170 for details. 

Set this parameter to on to enable “EAN 13”.

This character, if non-zero, is added before a successfully decoded bar code. Press the key 
you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key 
value of the keypress is displayed.