Psion Inc 7505BTMW Manuel D’Utilisation

Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the number of 
characters (i.e., human readable characters), including check digit(s). 

Double-tapping on these parameters displays dialog boxes where you can define the code 
length that will be recognized by your scanner.

You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.

Refer to “Field Size/Chars” on page 170 for details.

Set this parameter to on to enable “MSI”.

Set this parameter to on to enable “Plessy”.

The available options for this parameter are MOD 10 Check and Double MOD 10 Check. 
This parameter uses the specified algorithm of the option you've chosen to ensure the integ-
rity of the symbol data before transmitting. If the data does not contain that algorithm, the 
data is not transmitted. 

If the check digit is to be transmitted with the data, this parameter must be enabled.

If the check digit is to be transmitted with the Plessy data, this parameter must be enabled.

Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to 
the number of characters (i.e., human readable characters), including check digit(s). 

Minimum lengths for the Plessy bar code can be set from 0 to 255. The length of a code 
refers to the number of characters (i.e., human readable characters), including check digit(s).