Visonic Inc. SPD1000 Manuel D’Utilisation

DE3652

1

SPD

SPD

SPD

SPD-1000

-1000

-1000

-1000

1

11

1. INTRODUCTION

. INTRODUCTION

. INTRODUCTION

. INTRODUCTION

SPD-1000 is a fully supervised wireless detector, designed for
protection of paintings, sculptures and other artwork, in
museums, galleries, churches, private artwork collections, etc.

When someone tries to touch or remove the secured object, to

which the detector is attached, an identifiable alarm signal is

transmitted to alert security personnel. Identifiable signals

include: low battery voltage alert, low severity alarm (slight touch)

and high severity alarm (repetitive touch, strong touch or

removal).

In addition, the detector periodically sends

supervision signal as a serviceability report.
With PowerArt high level, sensitivity can be

extended.
The detector has 3 modes:
  A . “Sleep” - for the detector transport or

long term storage, without causing an

alarm. In this mode the current

consumption is very low.

  B . “Installation” - for sensor's spring active

range adjustment and for teaching the

SpiderAlert / PowerArt system the

detector’s identity.

  C . “Operation”.

All mode changes and alarms are aurally indicated by an integral

buzzer.
The SPD-1000 has tracking mode (for SpiderAlert only) that

enables to track the secured object's location up to 10 minutes

after its removal (with SpiderAlert receivers deployed within the

site). This option is possible if the detector is attached to the

secured object.
For a large painting, several SPD-1000 units can be used.

2

22

2. SPECIFICATIONS

. SPECIFICATIONS

. SPECIFICATIONS

. SPECIFICATIONS

Movement Detection Sensitivity: 0.1 mm
Transmission Frequency (MHz): 315 or 433.92
Compatible Receivers: PowerArt / MCR-308, SpiderAlert

SR-500ER / SCP-532ER / SR-520ER.
Overall Message Length: 36 bits, including 24-bit identification

code, pulse width modulation.
Supervision

 

Every

 

60

 

min.

 

(USA)

 

/

 

15

 

min.

(Europe)
Power Source: Two 3V/160 mAh Lithium batteries, GP CR-2025,

or equivalent.
Current Consumption: 8 

µA (STBY), 8 mA (transmission)

Battery Life: 5 years under normal installation conditions

Battery Supervision: Automatic transmission of battery condition

data as part of any status report.
Tracking Transmission: Every 30 sec., while the secured object

is being moved from its original place, up to 10 min. after last

movement.
Operating Temperatures: 0

°C to 50°C (32°F to 122°F)

Dimensions (HxWxD): 96

 

x

 

28

 

x

 

22

 

mm

 

(3-13/16

 

x

 

1-1/8

 

x

 

7/8 in.)

Weight (with battery): 34.8 g (1.2 oz)
Color: Housing - white, spring - nickel
Compliance with Standards: FCC part 15, IC:1467102181.

The term "IC" before the certification/registration number only
signifies that the Industry Canada technical specifications were met.

3

33

3. INSTALLATION

. INSTALLATION

. INSTALLATION

. INSTALLATION

3.1 Installation Options