Advance Security Inc R52 Manuel D’Utilisation
5
When Your Security System is Triggered, Continued
Attempted Intrusion Identification
Pressing UNLOCK after a full 30 second trigger cycle has completed, the horn will honk 4 times and the
LED will flash a number of times to indicate which input triggered the alarm. Turning on the ignition or
pressing the valet/override button will reset the LED flashes, pressing the valet/override button will also
honk the horn to match the LED flashes before it resets.
LED will flash a number of times to indicate which input triggered the alarm. Turning on the ignition or
pressing the valet/override button will reset the LED flashes, pressing the valet/override button will also
honk the horn to match the LED flashes before it resets.
Number of flashes:
1 - Interior Theft Sensor (Shock Sensor)
2 - Door Input
3 - Hood Input
4 - Trunk Input
5 - Ignition
1 - Interior Theft Sensor (Shock Sensor)
2 - Door Input
3 - Hood Input
4 - Trunk Input
5 - Ignition
Emergency Disarm Procedure
If your remote control is lost or fails to function, use this procedure to disarm the MM1 Security System
and start your vehicle.
and start your vehicle.
1 - Use the keys to enter the vehicle. The alarm will sound once the door is opened.
2 - Insert the key into the ignition and turn to the ON position.
3 - Locate and press the emergency override button. The alarm will turn off and then you will be
able to start the vehicle.
2 - Insert the key into the ignition and turn to the ON position.
3 - Locate and press the emergency override button. The alarm will turn off and then you will be
able to start the vehicle.
Your Emergency Override Button is Located:
_________________________________________
Basic Trouble Shooting
Symptom
Problem
Solution
Remote does not work:
Weak or dead battery.
Change battery.
System will not arm:
Door or entrance is open.
Close entrance.
Courtesy light is on.
Turn courtesy light off.
System is in Valet mode.
Exit Valet mode.