Advance Security Inc T67 Manuel D’Utilisation

4

ca4055 - ca4555 Owners

   Before exiting the vehicle, set the temperature controls to the desired setting and 

operation.  After the system starts the vehicle, the heater or air conditioner will 

activate and heat or cool the vehicle’s interior to your setting.

   If you want to make a short stop and keep your vehicle running (to keep the interior 

warm or cool), the quick-stop feature allows you to do this while keeping your vehicle 

secure and your keys with you.

  

 

 

1.    Stop the vehicle and place the transmission in PARK.

 

 

2.   With your foot off the brake pedal, press and release the 

 button 2  

 

 

times within 2 seconds. The LED will flash 3 times to confirm quick  

 

 

stop is entered.

 

 

3.    Remove the keys from the ignition and exit the vehicle. Press the

   

 

 

button to lock the vehicle’s doors if desired.

 

Note:  Do not leave children or animals unattended in the vehicle when using the  

quick-stop feature.

  As a security precaution each time the vehicle’s ignition is turn on the status LED 

light with flash the number of transmitters programmed into the system. This helps 

to identify unauthorized transmitters from accessing your vehicle. If you believe an 

unauthorized transmitter has been programmed to your system, contact your installing 

dealer for assistance.

 

When valet mode is activated the status LED will light solid and all remote start  

 

functions will be disabled. To enter or exit valet mode simply follow the steps    

 

outlined below:

 

 

1.   Turn the vehicle’s ignition ON.

 

 

2.   Push and hold the programming/valet button.

 

 

3.   The LED will turn on solid when valet mode is active

 

 

4.   Release the programming/valet button.