Tatung Company TIH-F1500 Manuel D’Utilisation

4

When the heating level is changed by pressing the control key, the 
food is immediately exposed to different temperature. Do NOT PUT 
EMPTY PANS on the heating zone. First, put oil or liquid into the 
pan and then start cooking by pressing the control key. The heating 
level can be adjusted to different cooking mode.  
The pan should always remain in the center of the heating zone 
during cooking; otherwise the bottom of the pan will be heated up 
unequally and the food in the pan may be burnt.  
While heating up oil, constantly check the pan to prevent 
overheating and burning.  

 (1) press any function to  active the cooker, the cooker will 

auto detect the if cookware is proper within 30seconds. 

（2）if no cookware or cookware material is not proper, the 

buzzer will sound per 0.2S and the first LED display level 

light  will flash the cooker will auto switch off and change 

to stand by mode if no cookware or cookware material is 

not proper after 30seconds, 

（3）if put proper cookware within 30seconds, the cooker will 

start to heating. 

（4）warm level, temperature and turbo function can be active 

at any working mode. 

     Press warm level”button to active warm function, the warm 

level indicator light on and the correspond warm level "140F" 

LED light will on, the default warm level will be set at 140F,  

5

 total 3 warm level can be select during this function ,you can 

press + or - key to adjust warm level at 140F,158F and 176F. 

  Press "turbo”button to active turbo function,the cooker  will 

heating with max power for 3 minutue and then will turn to 

warm level function automatic. 

   Press temperature level”button to active temperature 

function, the temperaure level indicator light on and the 

correspond temperature level  LED light will on, the default 

warm level will be set at 374F,  total 5 warm level can be select 

during this function ,you can press + or - key to adjust warm 

level at 320F,338F,356 374F and 392F. 

If there is no cooking utensil on the cooking zone or if it is not 
suitable for induction cooking, the first LED level light will flash”.   

Temperature protection: If the insulated gate bipolar transistor’s 
(IGBT) temperature is too high, the cooker will switch itself OFF. 
The buzzer will sound and the second LED level light will flash.   

Lower / higher voltage protection: If the local voltage is lower than 
95 V, the fourth led level light will flash”. When it is more than 140 
V, the third LED level light will flash  

Sensor detector: If the main sensor detects any disconnection or 
short circuit, the fifth LED led level light will flash.