GatesAir Inc. UAXFLID Manuel D’Utilisation
2-2
888-2721-001
10/6/10
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation / Initial Turn-On
Maxiva UAX Transmitter Indoor System
User Manual
2.2.1
UAX Indoor System Drawings
It is recommended that you look through the documentation package to familiarize
yourself with the information available. The installation and planning information is
given in the following drawings:
yourself with the information available. The installation and planning information is
given in the following drawings:
Wiring Diagram AC Distribution - 843-5602-104 (in drawing package 943-5276-
170) shows 208-240VAC wiring and has information on system current requirements.
170) shows 208-240VAC wiring and has information on system current requirements.
UAX Indoor System Interconnect Diagram - 839-9363-262 (in drawing package
917-2323-240) shows interconnect wiring between transmitter and all peripheral
systems.
917-2323-240) shows interconnect wiring between transmitter and all peripheral
systems.
2.3
Cabinet Placement
The cabinet can be moved into position using a fork lift or a pallet jack. As an
alternative the cabinet can be lifted in place using the four (4) lifting eye bolts supplied
with the system. The eye bolts are shown in Figure 2-1.
alternative the cabinet can be lifted in place using the four (4) lifting eye bolts supplied
with the system. The eye bolts are shown in Figure 2-1.
!
CAUTION:
LIFT STRAIGHT UP, EVENLY FROM EACH LIFT POINT TO AVOID PLACING
EXCESSUVE STRESS ON ANY ONE LIFT EYE.
EXCESSUVE STRESS ON ANY ONE LIFT EYE.
Figure 2-1 Lifting Eye Bolt