GatesAir Inc. UAXFLID Manuel D’Utilisation
10/6/10
888-2721-001
3-1
WARNING: Disconnect primary power prior to servicing.
Maxiva UAX Transmitter Indoor System
User Manual
Section 3
Operation &
Maintenance
Maintenance
3
3.1
Introduction
This section provides operational information for the UAX Transmitter Indoor System
NOTE:
Operation of the UAX Transmitter and the LPU (low power unit) is covered in a
separate manual which ships with the system.
separate manual which ships with the system.
3.2
Transmitter Control Unit (TCU)
The TCU front panel user interface utilizes a 1/4 VGA, LCD touchscreen display. See
Figure 3-1. This touchscreen display uses software buttons to monitor the transmitter.
There are 12 hardware buttons for the primary transmitter functions shown in
Transmitter Control Panel. Refer to the UAX Transmitter Manual 888-2693-004 for
details.
Figure 3-1. This touchscreen display uses software buttons to monitor the transmitter.
There are 12 hardware buttons for the primary transmitter functions shown in
Transmitter Control Panel. Refer to the UAX Transmitter Manual 888-2693-004 for
details.
The TCU Home screen shows the total output power of the transmitter before the output
filter. Note that no VSWR is displayed. The VSWR is read off the LPU (low power
unit....Exciter) screens.
filter. Note that no VSWR is displayed. The VSWR is read off the LPU (low power
unit....Exciter) screens.