Tongya Telecommunication Industry Co. LTD. TAI-TYP907001 Manuel D’Utilisation
10
**64*NN*
This command is for setting all other prefix number except the prefix
number that had been set by command **63*NN*MMM…#. For
example, **64*10*, it means that all other prefix number will be send
out immediately after you dial 10 digitals.
Specially, **64*00*, it means that all other prefix number do not be sent
out immediately, need delay.
Factory setting: 00, No limit.
12
Billing interval
**78*TTT*
Charging every few seconds to send signals.
For 12/16KHZ only.
TTT: Unit second.
When the TTT is 000, do not send pulses
When the TTT is 999, When connected only to send a pulse.
This command is for setting all other prefix number except the prefix
number that had been set by command **65*XXX*YYY*NNN…#.
Factory setting: 15 seconds.
13
Special Offer
Setting
1. Special offer time setting
Command: **67*HHMM*HHMM#
For example, **67*2030*0800#, it means that the Special offer time
is from 20:30 to 8:00.
Factory setting: 20:00~08:00
2. The interval of sending 12/16KHz pulse signal
Command: **65*XXX*YYY*NNN…#
XXX is the interval of sending 12/16KHz pulse signal when it is not
in Special offer time. The value of XXX is from 000 to 999 seconds. It
must be 3 digitals. If XXX=000, it means that it does not send out
12/16KHz pulse signal.
YYY is the interval of sending 12/16KHz pulse signal when it is in
Special offer time. The value of XXX is from 000 to 999 seconds. It must
be 3 digitals. If XXX=000, it means that it does not send out 12/16KHz
pulse signal.
“NNN…” is the prefix number.
It can be set 20 groups this command.
For example, if you set command:
**67*2030*0800#
**65*015*030*05#
It means that if you dial a phone number begin with 05 at time 10:00, it
will send 12/16KHz pulse signal per 15 seconds, and if at time 21:00, it
will send 12/16KHz pulse signal per 30 seconds.
3. Reset
Command: **65*#
This command clear all the settings that set by command
“**65*XXX*YYY*NNN…#”.